Mine Site RF
Understand what your operation quietly depends on a radio signal for, why a link that worked yesterday drops out against the highwall today, and why the rule about a handheld near a charged pattern has a physical mechanism behind it.
- Time
- About 14 hours
- Size
- 7 modules ready, 7 to build with you
What the course covers
1 lessonAbout 10 minutes
A short tour of how a lesson works. Try each kind of screen, find help, wire a first system in the Radio Lab, and learn how to tell us about a problem.
- How a Lesson WorksMove through the screens of a lesson, answer a question and a prediction, find help, wire a first system and try the feedback button.
4 lessonsAbout 45 minutes
Radio signals pass through every room, and none of your senses detects them. This module explains what a signal is, how a receiver separates signals, and how to read a display that shows them.
10 lessonsAbout 2 hours
What a wave is, what the number on a radio dial measures, and what radio is made of. Then how fast radio travels, what that lets a receiver measure, and how one signal looks in time and in frequency.
14 lessonsAbout 2 hours
Why a signal weakens with distance, and what metal, walls, hills, the curve of the Earth and noise do to it. Then how the air and the ionosphere carry radio further, what echoes and several signals tell a receiver, and why a reflection can mislead it.
10 lessonsAbout 2 hours
Why a steady wave carries no message, and how AM, FM, single sideband and on-off keying put one on it. Then how much bandwidth a message needs, what too much modulation does, and why stations on one channel take turns.
18 lessonsAbout 3 hours
What an antenna does and why its size follows the frequency. What happens inside a transmitter and a receiver, and how to check the cable and the match between them.
22 lessonsAbout 4 hours
Decibels, volts and amps, and how radio users share the spectrum. How to stay safe with the mains, with batteries and near antennas.
Built with your organisation
Working With Signals Somebody Else Built
What your operation runs on that somebody else owns, how a system shows you its output has gone bad, and how to report a fault to the person who can fix it.
Where Your Operation Depends on a Signal
Walking your own process to find the radio inside it, telling deliberate interference from a broken box, and knowing which failures arrive quietly.
Mine Site Radio
Why a link that worked yesterday fails against the highwall today, what happens underground, and what a machine does when the signal it was relying on stops.
Mine RF Fundamentals
The links a site runs on, who depends on each one, and what stops when one of them does.
RF Safety: the Mechanism
The three things a transmitter can harm — a person, something that fires electrically, and fuel — and why they are one piece of physics.
Hazards to Ordnance
Why only a tiny amount of energy can fire an explosive. Which part of a charged fuse picks up the RF and how safe distances are calculated.
Australian RF Safety Rules
Who sets the exposure limit and what an assessment does. How to find the authority that sets the distance for your own site.
Teaches the radio behind the work, so your people can take part in the technical conversation.
Your organisation gives its own training and qualifications. This course does not replace them.
A shotfiring licence, an explosives or blasting authorisation, a site authorisation and a verification of competency each come from their own authority, separate from this. Where a distance matters, this teaches you which document holds the number for your site, and the number stays there.